State GTS-140-PIH User Manual download pdf (Page 39)

39 Page

Operation Screenonthecontroller

Inlet water temperature will be displayed on the

controller by pressing the "INFO"button.

Outlet water temperature will be displayed on the

controller by pressing the "INFO"button.

Water flow rate, in gpm, will be displayed on the

controller by pressing the "INFO"button.

Press the "INFO" button to finish information mode.

Inlet water temperature

(EX.: 60 °F)

Outlet water temperature

(EX.: 120 °F)

Water flow

(EX.: 3.5 GPM)

-Informaon mode-

-Unit conversion mode-

When the water heater is connected with the remote controller, the temperature

controller will not operate temperature settings, as only work for the information

mode (Indoor model only).

Operation Screenonthecontroller

Press the "ON/OFF" button on the controller in

order to turn the controller on.

When ON, the orange LED is lit.

The previous set temperature will be displayed on

the screen.

Press the "INFO" buttons for at least 3 seconds.

The set temperature should now be displayed in the

alternate unit of measurement.

(EX.: 100 °F)

(EX.: 38 °C)

ADDTIONAL FEATURES

You can get some information about the water heater condition by pressing the "INFO" button. For more

information, follow the procedures below:

The controller display information can be changed from English Units to S.I. / metric units.

Please follow the procedures below:

Normal Operaon

Owner's Guide

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

No comments

State GTS-140-PIH User Manual Page 39